Hoist and Crane Drive Control Systems





  Micro-Speed MD Design

Micro-Speed MD Design®


Features
• High Temperature: Rated to 50 degrees C (130 degrees F)
• Exclusive 300% current output for maximum motor torque
• Gang-Set® programming – sets up in minutes not hours or days!!!!
• Designed exclusively for Demag, Coffing, Harrington, and other brands of quality chain hoists.

Specifications • CMAA Duty A, B, C, D, E, F
• Dedicated Brake control output relay
• 3-speed inputs can be set for numerous control possibilities including infinitely variable, etc.
• Overload input for thermistors or overload heaters
• Programmable for 50 and 60 hertz
• 208-230, 385-415, 460, and 575VAC units available
• AND MORE!



  Micro-Speed CX

Micro-Speed CX®


Features
• High Temperature: Rated to +60 degrees C (+140 degrees F)
• Exclusive 300% current output for maximum motor torque
• Gang-Set® programming – sets up in minutes not hours or days
• Internal regeneration resistors built-in through 5HP
• Pre-set to 5 step before shipping

Specifications
• Regeneration circuitry included on all models
• CMAA Duty A, B, C, D, E, F
• Dedicated Brake control output relay
• 5-speed inputs can be set for numerous control possibilities including infinitely variable, etc.
• 2 auxiliary inputs programmable for limit switches, slow downs, special speed points and more
• Programmable for 50 and 60 hertz
• 208-230, 385-415, 460, and 575VAC units available
• AND MORE!



  Micro-Speed MV

Micro-Speed MV®


Features
• For hoists without mechanical load brake
• The ONLY drive designed exclusively for no load brake hoist control!
• High Temperature: Rated to +60 Degrees C (+140 degrees F)
• Exclusive 300% current output for maximum motor torque
• Gang-Set® programming – sets up in minutes not hours or days!!!!

Specifications
• Quadrature differential line driver encoder inputs with 12vdc supply
• CMAA Duty A, B, C, D, E, F
• 2 analog inputs including a 10vdc power supply if needed
• Separate thermal overload input for external sensing & event storage
• Dedicated Brake control output relay
• Programmable user 2 form C relays
• 5-speed inputs can be set for numerous control possibilities including infinitely variable (with deceleration in the down direction), etc.
• 4 Programmable to needs auxiliary inputs for limit switches, slow downs, special speed points and more
• Special features programming available at PE (upon application)
• Programmable for 50 and 60 hertz
• 208-230, 385-415, 460, and 575VAC units available
• AND MORE!



  Micro-Speed MX

Micro-Speed MX®


Features
• High Temperature: Rated to +60 degrees C (+140 degrees F)
• Exclusive 300% current output for maximum motor torque
• Gang-Set® programming – sets up in minutes not hours or days!!!!
• Pre-set to 5 step before shipping

Specifications
• Separate thermal overload input for external sensing & event storage
• CMAA Duty A, B, C, D, E, F
• Dedicated Brake control output relay
• Programmable user 2 form C relays
• 5-speed inputs can be set for numerous control possibilities including infinitely variable (with deceleration in the down direction), etc.
• 4 auxiliary inputs programmable for limit switches, slow downs, special speed points and more
• Special features programming available at PE (upon application)
• Programmable for 50 and 60 hertz
• 208-230, 385-415, 460, and 575VAC units available
• AND MORE!



  Micro-Speed Smart-Move

Micro-Speed Smart-Move®


Features
• High Temperature: Rated to 50 degrees C (130 degrees F)
• Exclusive 300% current output for maximum motor torque
• Gang-Set® programming – sets up in minutes not hours or days!!!!
• Internal regeneration resistors built-in
• Universal Voltage Input models 208-480 in the same unit
• Why not stock a unit on each service truck to upgrade your customers. Universal VAC input makes it easy.

Specifications
• Regeneration circuitry included on all models
• CMAA Duty A, B, C, D, E, F
• Dedicated Brake control output relay
• 3-speed inputs can be set for numerous control possibilities including infinitely variable, etc.
• Overload input for thermistors or overload heaters
• Programmable for 50 and 60 hertz
• 208-230, 385-415, 460, and 575VAC units available
• AND MORE!




  Smooth-Move

Smooth-Move®


Features
• U.L., C-U.L. approved.
• Takes the "kick" out of 3-phase motor starting.
• Softly phase controls voltage to the motor.
• Phase loss protection on input.
• ARC-ELIMINATION™ on contactor make & break extends contactor life up to the mechanical limit.

Specifications
• Automatic UNIVERSAL VAC selection: 200, 208, 240, 385, 415, 440, 480, VAC in one unit
• 200 and 575 VAC is also available.
• Size of a small contactor.
• TIME and TORQUE settings for motor softness.
• Sizes up to 10 full load amps.



  Smooth-Move 2

Smooth-Move® 2


Features
• Smooth acceleration and deceleration from second to first speed.
• Designed specifically for two-speed A.C. motors.
• U.L., C-U.L. approved.
• Takes the "kick" out of 3-phase motor starting.
• Softly phase controls voltage to the motor.
• Phase loss protection on input.
• ARC-ELIMINATION™ on contactor make & break extends contactor life up to the mechanical limit.

Specifications
• Automatic UNIVERSAL VAC selection: 200, 208, 240, 385, 415, 440, 480, VAC in one unit
• 200 and 575 VAC is also available.
• Size of a small contactor.
• TIME and TORQUE settings for motor softness.
• Sizes up to 8 full load amps.




  BT Series Single Speed

BT Series Single Speed


Features
• U.L., C-U.L. approved.
• Takes the "kick" out of 3-phase motor starting.
• Softly phase controls voltage to the motor.
• Phase loss protection on input.
• ARC-ELIMINATION™ on contactor make & break extends contactor life up to the mechanical limit.

Specifications
• Automatic UNIVERSAL VAC selection: 200, 208, 240, 385, 415, 440, 480, VAC in one unit
• 200 and 575 VAC is also available.
• Size of a small contactor.
• TIME and TORQUE settings for motor softness.
• Sizes up to 100 full load amps.



  BT Series Dual Speed

BT Series Dual Speed


Features
• Smooth acceleration and deceleration from second to first speed.
• Designed specifically for two-speed A.C. motors.
• U.L., C-U.L. approved.
• Takes the "kick" out of 3-phase motor starting.
• Softly phase controls voltage to the motor.
• Phase loss protection on input.
• ARC-ELIMINATION™ on contactor make & break extends contactor life up to the mechanical limit.

Specifications
• Automatic UNIVERSAL VAC selection: 200, 208, 240, 385, 415, 440, 480, VAC in one unit
• 200 and 575 VAC is also available.
• Size of a small contactor.
• TIME and TORQUE settings for motor softness.
• Sizes up to 100 full load amps.